|
Baldor
Automotive Motors
Automotive approved motors are
available in both Standard High Efficiency, Baldor’s
Standard-E, and Premium Efficiency, Baldor’s Super-E,
designs. The Standard High Efficiency motors meet efficiency
times power factor requirements of GM7EQ. The Premium
Efficiency motors meet the efficiency times power factor of
GM7EHQ. Stock models available in ratings from 1 HP to 100
HP. These cast iron motors meet automotive requirements for
sound power levels. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor Brake
Motors
Baldor's line of brake motors are
available in open drip proof, totally enclosed fan cooled,
or explosion proof designs, in either single or three phase.
Available in stock ratings from .25 horsepower through 30
horsepower. These motors use a mechanical spring set brake
with a manual release. Brake motors may be used on
conveyors, machine tools, hoists, door operators, speed
reducers, or any application requiring quick stops and
positive holds. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor
Explosion Proof Motors
Baldor's Explosion-proof motors are ideal for a wide variety
of applications where hazardous fumes or dust may be
present. The motors are available in single phase and three
phase with ratings, in stock, from 1/4 HP through 300 HP.
Designs available include standard foot mounted, C face with
base and C face less base, 50 Hz and 60 Hz, Jet Pump motors,
and Inverter Drive motors. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor F-2
Mounting Motors
These motors are built for applications requiring F-2
mounting are available from stock in 1/2 HP through 60 HP.
These motors are manufactured in both Open Drip Proof and
TEFC construction in NEMA frames from 56 to and including
364T. Many of the ratings are Class "F" insulated with 1.15
Service Factor that operate within Class "B" temperature
limits. These motors are stocked in both Standard High
Efficiency and Premium Efficiency designs.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor Farm
Duty Motors
These motors are designed for many of the varied
applications found on the farm. Designs available include
motors suitable for auger drives, grain stirring, aeration
fans, metering pumps, instant reversing, irrigation tower
drives, and crop driers. General purpose Baldor motors are
also available in both single and three phase, TEFC and ODP
construction. For those loads that are hard to start and
require extra torque, Baldor is the only motor manufacturer
stocking Repulsion-Start Induction Run motors, in sizes from
2 HP to 10 HP. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor General
Purpose Motors
Baldor's extensive line of General Purpose motors are
available in TEFC and Open Drip-proof construction in both
single and three phase. Horsepower sizes available from
stock range from 1/12 HP through 1500 HP. Designed for
"general purpose" use means that these motors can be used in
applications which include compressors, machine tools,
pumps, fans, conveyors, material handling and many others.
Also available are stock motors that are direct replacements
for the motors built in Pre-1952 NEMA frames.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor Hostile
Environment Motors
Chemical Processing motors - available from 1 HP to 500 HP.
Especially designed for those applications requiring
protection of the motors from severe environmental operating
conditions. A few typical applications which might require
these types of motors include mines, petro-chemical plants,
foundries, rock crushers, pulp and paper plants, waste
management facilities, and chemical plants.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor HVAC
Motors
Baldor's line of Heating, Ventilation, and Air Conditioning
Motors are designed with dynamically balanced rotors for
reduced vibration and quiet operation. The motors range in
size from 1/4 HP to 75 HP and include heavy duty industrial
designs as well as designs for commercial applications.
These applications include ventilators, exhaust fans, direct
drive and belted fans, unit heaters, air conditioning units,
and commercial refrigeration condensers. Also included are
motors designed especially for use with variable torque
electronic controls that are used to conserve electricity.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor
Inverter Duty Motors
Inverter Drive Motors are wound with 200 degree C. moisture
resistant ISR (Inverter Spike Resistant) magnet wire which
dramatically extends the life of the motors compared to
motors wound with non-ISR wire. Stock motors available range
in size from 1/3 HP to 500 HP. These motors are designed for
applications where up to a 1000:1 constant torque speed
range is required. Applications include compressors,
conveyors, metal processing, pumps, fans, test stands, and
material handling equipment. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor Metric
Motors
Baldor's line of Metric Dimension Motors are designed in IEC
Frames from D63 through D200L. The motors are available from
stock in 50 Hz or 60 Hz. This means that replacement 60 Hz
motors are readily available from Baldor to replace metric
motors that have failed on imported machinery. Motor
construction meets IP54 and includes motors with B3 base
mounting, B5 Flange mounting, or B14 Face mounting. Stock
motors range in size from .18 kW to 30 kW. Typical
applications for this product include conveyors, pumps,
fans, machine tools, gear reducers and any other jobs that
requires IEC Frames. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor Premium
Efficiency Motors
Super-E Motors are designed to conserve energy over extended
time. These premium efficiency designs are available in both
Totally Enclosed Fan Cooled and Open Drip Proof
construction. All three phase motors are Inverter Ready per
NEMA Standard MG1, Part 31.4.4.2. This means the motors in
230 and 460 volts meet NEMA'a corona inception voltage
requirements, under this Standard, and can withstand peak
voltages of up to 1600 volts. Motors having premium
efficiency are also available in single phase designs.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor
Pressure Washer Motors
These single phase motors are available in both open drip
proof and totally enclosed fan cooled construction. Built as
industrial quality with 200 degree C., moisture resistant
wire, the motors have UL and CSA recognized component
approvals. Nema frames sizes include 56 through 184 in rigid
base only or NEMA C face with base.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor Pump
Motors
Baldor’s pump line of motors includes single or three
phase square flange motors, jet pump motors, close-coupled
pump motors, and P-Base vertical solid shaft pump motors.
These motors are stocked in totally enclosed fan cooled,
open drip proof, and many explosion proof ratings.
Applications for these run the gamut from swimming pool
pumps to medium and high thrust in-line pumps used in water
treatment plants. Horse powers range in size from 1/3
through 75 HP. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor Servo
Motors
Baldor's servo line includes both brush and brushless type
motors. Designs are available having either ferrite or rare
earth magnets. Numerous ratings are stocked and are
available with Baldor controls for Matched Performance.
These motors are ideal for industrial type applications
where high torque to inertia ratio and repeatability are
required. These applications include material handling, X-Y
positioning, factory automation, machine tools, and
packaging equipment. Call
(510)490-2187 for additional details and to order. Special
sale on now!
Baldor
Two-Speed Motors
Baldor’s Two Speed Motors are available in both totally
enclosed fan cooled (TEFC) and open drip proof (ODP)
designs. Constant torque or variable torque motors having
one winding or two winding are stocked in NEMA frames 56
through 284T. Applications for these motors include fans,
machine tools, blowers, pumps, hoists and conveyors.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor Vector
Motors
Vector Drive Baldor Motors are stocked in either totally
enclosed blower cooled with an attached constant velocity
fan or totally enclosed non-ventilated construction. All
motors are supplied with a 1024 line count encoder.
Available from 1 through 500 HP in NEMA frame sizes from 56C
through 5009L. The motors are ideal in industrial
applications where full torque is required from base speed
down to zero speed. Applications include test stands,
printing presses, material handling, packaging equipment,
and others requiring exact speeds and positioning.
Call (510)490-2187
for additional details and to order. Special sale on
now!
Baldor
Washdown Motors
Baldor's Washdown Duty Motors are available from stock in AC
and in DC single and three phase designs. Horse powers range
from 1/2 to 20 HP. Designs include motors having an
electostatically applied epoxy finish, paint free having
major components of the motor in 300 stainless steel, and
all stainless steel. Applications include food processing,
pharmaceuticals, packaging, or applications where motors are
regularly exposed to high pressure wash down.
Call (510)490-2187
for additional details and to order. Special sale on
now!
For more technical
information call (510) 490-2187.
Tower Electric
Motor Company has experience selling and maintaining
electrical motors and manufacturing single to three phase
converters over the years since 1968. All our electrical
products are made to the highest quality standards and are
backed by industry standard warrantees. When you want an
electric motor, phase converter, power generator, or quality
motor supply, turn to TEMCo.
.gif)
Order
Electric Motor •
Rotary
Phase Converters
•
Static
Phase Converters
•
Power
Generators
•
3
Phase
•
Acme
Transformers
•
GE
Transformers
•
Three
Phase
Transformers
•
Single
Phase
Transformers
•
Step
Up Transformer
•
Step
Down Transformer
•
Isolation
Transformers
•
Three
Phase Power
•
Portable
Three Phase
Generators
•
Robin
Generator
•
Fremont CA Jobs
•
Pow'R
Gard Generators
•
Distribution
Transformers
•
Transformer
Manufacturer
•
Custom
Transformers
•
Power Transformer
• Step
Up Transformer • Step
Down Transformer • CNC
Phase Converter
•
Transformer
Manufacturer
•
Custom
Transformers •
Variac
•
Voltage
Regulator •
Switchgear
•
Diesel
Generator
•
Transformers •
AC
Transformer •
Voltage Transformer •
Buy
Transformers •
New
Transformer •
Output
Transformer •
Transformer KVA •
Converter Transformer •
Line
Transformer •
Toroidal Transformer
Remember to bookmark this page!
We appreciate feedback, send us email us at info@phaseconverter.com
Include phone #. Feel free to add a link to us!
|
